Notices

WTF...Windshield Washer Squirts Don't Work?!

Thread Tools
 
Old Jul 13, 2002 | 07:49 AM
  #11  
crucial Si's Avatar
crucial Si
Banned
 
Joined: Mar 2002
Posts: 8,220
Likes: 0
Default

Originally posted by fujiwara takumi
the worst thing about my car is that when i wash the windows that **** comes in the moonroof, whats up with that?
adjust them....
Reply
Old Jul 13, 2002 | 09:09 AM
  #12  
Max Power's Avatar
Max Power
Buff Member
 
Joined: Jun 2002
Posts: 690
Likes: 0
From: sOcaL
Default

Originally posted by fujiwara takumi



hahah, like when Mayor Quimby gets all the garbage in hsi face from the podium?
u kno those little fountains with the fish shooting an arc or water across? well, imagin that to be a nasty grimey sandy substance onto a windshield and tahts wat i saw :barf:
Reply
Old Jul 13, 2002 | 09:12 AM
  #13  
asiandoood's Avatar
asiandoood
sancho on the sizzide!
 
Joined: Aug 2000
Posts: 27,129
Likes: 0
Default

the right side of my friend's squirter is clogged...so the pressure of left side squirts over the car into the windsheild of tailgaters
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
Reply
Old Jul 13, 2002 | 01:38 PM
  #14  
The G2 Racer's Avatar
The G2 Racer
Thread Starter
Want Boost!
 
Joined: May 2002
Posts: 2,624
Likes: 0
From: Ontario
Default

I think the motor is gone......I couldn't even hear it trying today, all of my fuses are fine.

Bumnah: How do you go about removing the wind shield washer set up?
Reply
Old Jul 13, 2002 | 02:10 PM
  #15  
Bumnah's Avatar
Bumnah
So OG it hurts.
 
Joined: Mar 1999
Posts: 6,592
Likes: 0
From: VA
Default

remove front bumper
on the driver side you will see the winshield washer fluid resevoir and under it the pump

if the pump is bad replace. i took mine and chucked it into the woods...

if you wanna remove the ****..

there are bolts near the filler neck of the resevoir; remove them. unplug the wires to the motor, and tie them so they aren't dangling. or cut them to make it permanent.

then start removing the hosing... pretty easy...

as my friend said after i removed it, "wow you just saved 16 oz."

__________________
Project EVA - The Track Package
-----
Project EVA
-----
Reply
Old Jul 13, 2002 | 02:27 PM
  #16  
crucial Si's Avatar
crucial Si
Banned
 
Joined: Mar 2002
Posts: 8,220
Likes: 0
Default

did you sell it on ebay?
Reply
Old Jul 13, 2002 | 04:48 PM
  #17  
Fujiwara Takumi's Avatar
Fujiwara Takumi
It's my first day.
 
Joined: Nov 2001
Posts: 13,635
Likes: 0
From: Grafton, WI.
Default

Originally posted by crucial Si

adjust them....
nah, its hitting the window and wicking up to the roof as i drive.
Reply
Old Jul 13, 2002 | 06:47 PM
  #18  
FourthGenHatch's Avatar
FourthGenHatch
I'm RICK JAMES, bitch!
 
Joined: Mar 2002
Posts: 4,742
Likes: 0
From: Baltimore, Md
Default

My fronts used to be busted but my back worked, but my back wiper was dead. So what I did was one day when my bumper was off anyway I saw there were 2 little things with 2 hoses going into them, so I pulled out the hoses and switched them so now my fronts work. Only problem is that I don't have nozzles in the first place.
Reply
Old Jul 13, 2002 | 07:54 PM
  #19  
CivicPete's Avatar
CivicPete
Member
 
Joined: May 2002
Posts: 85
Likes: 0
From: Minneapolis, MN
Default

make sure the lines are in good shape i found wholes in mine and had to re do the tubeing
Reply
Old Jul 14, 2002 | 09:10 AM
  #20  
94civicEX's Avatar
94civicEX
I got worms.
 
Joined: Jul 2000
Posts: 32,238
Likes: 0
From: Utah
Default

Make sure there is fluid in there, first thing. :rofl:
__________________
99 Integra GSR
06 TSX

duck squad member #00003
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
white_n_slow
The Basement
38
May 4, 2008 11:21 AM
LT
The Basement
14
Feb 13, 2004 01:54 PM




All times are GMT -8. The time now is 05:00 PM.