Ok talking about VX brakes Can i use SI/EX brakes on mine?? If so how do i get around the ABS??

 

Ok, well i posted a while ago that my right wheel area is ****ed up, when i jack up the front, the right wheel will not turn but the left wheel will, (in Drive). Now would that be a warped rotor or the caliper? I have both to replace, new slotted/cross drilled front rotors, and these VX calipers coming in.

EDIT: In reverse, when the right wheel is turned to the right, it squeaks mad loud. Anyone know what's causing it?

 

your caliper might have froze and is constantly gripping on the rotor.

 

Yes, after driving around it gets rediculously hot, the rim, the rotor, everything around there. Should I just slap on the VX calipers till I can get a similar one to my EX's?

 

the EX is for EXTRAORDINARY

 

teh front calipers are diff sizes depending on ABS as well....

 

Can anybody answer my question???

 

vx calipers are for 9.4 inch rotors
i know ABS equipped cars had 10 inch rotors.
i am not sure about non abs equipped 4 sheel disc cars...

 

CX, VX and DX are all 9.4 inch rotors in front

EX, Si, GSR are 10.2 ...ABS or not.


correct me if im wrong.

 

then how come the abs si calipers and rotors are not the same parts, nor are the pads, shims or any other part compared to a non ABS SI?