Nitrous
Originally posted by WideBodyEK
damn you're getting jackked for 50 bucks a refill,...i get free refills (its good have friends at the local Advance Auto Parts
) but even if it wasnt free,...nitrous per pound here is only 3 bucks,..10 pound bottle would run you 30 bucks
damn you're getting jackked for 50 bucks a refill,...i get free refills (its good have friends at the local Advance Auto Parts
) but even if it wasnt free,...nitrous per pound here is only 3 bucks,..10 pound bottle would run you 30 bucks
its 4.75/lb here. but there are only 2 places within the entire area that i know of that sells it. so i am pretty much stuck. Its not like i can go and order it online and have it shipped to my door
Originally posted by LilDragonTKD
For you guys running a dry system, did you drill a hole for the lines running in the intake near the throttle body, or though the top of the filter?
For you guys running a dry system, did you drill a hole for the lines running in the intake near the throttle body, or though the top of the filter?
I am thinking of adding nitrious also, but I was wondering if the NX kit is any good. I have a friend that works at kragen auto and the sell it for $500 but if I wait till december I can get it at 35% off that, anyway just asking for opinions on the kit.
Originally posted by oc_civic
drilling too close to the throttle body will force the nitropus to the back cylender and may cause it to go lean... on the advice of an NOS tech, i drilled it pretty far away from the throttle body... thus allowing it to mix more with the air and give fo rmore even distribution...
drilling too close to the throttle body will force the nitropus to the back cylender and may cause it to go lean... on the advice of an NOS tech, i drilled it pretty far away from the throttle body... thus allowing it to mix more with the air and give fo rmore even distribution...
yeah that way it actually spreads out to a gas instead of a liquid stream.



