Can someone please tell me exactly what I need to install an Autometer Oil Pressure gauge on my civic. I don't mean tools, but what adapters etc. thanks!!

 

if its electronic oil pressure gauge and if you're tapping into the block itself, i suggest getting a 1/8 bspt male to 1/8 npt female to connect the sensor to the block...
the method i used was i got an oil adapter plate and connected my turbo oil pressure and oil pressure sensor to it.

 

thanks so much, that's what i needed to know! I hope it works, cause were having alot of problems fitting it to the block

 

yeah watch out man! make sure to get that 1/8 bspt (or whatever i keep forgetting) to 1/8 npt cuz the threading is different