mini swap
#1
Senior Member
Thread Starter
Join Date: May 2002
Location: near Pittsburgh, PA
Posts: 800
Likes: 0
Received 0 Likes
on
0 Posts
mini swap
my buddy blew his engine ( 93 dx d15) and I gave him my engine (97cx d16) i think? i just have a few questions for him.
1. could he just swap blocks or head
2. would he have to change axel
3. would he need to swap computer
any suggestoins would be great!!!:thumbup:
1. could he just swap blocks or head
2. would he have to change axel
3. would he need to swap computer
any suggestoins would be great!!!:thumbup:
#3
Rotorphile.
Join Date: Mar 2002
Location: Richmond, VA
Posts: 10,120
Likes: 0
Received 0 Likes
on
0 Posts
Are you sure? Kelly Blue Book lists a CX for '97.
The D16 block should be a direct replacement for the D15 and the stock axles and electronics should work fine.
The D16 block should be a direct replacement for the D15 and the stock axles and electronics should work fine.
#4
Registered User
Join Date: May 2003
Location: Dallas, TX
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
#7
wooooo woooooooooo
Join Date: Mar 2002
Location: Twin Cities
Posts: 3,134
Likes: 0
Received 0 Likes
on
0 Posts
uh, is the 6th gen cx like the 5th gen? 8 valve? if it is, you'd have to swap the whole engine in. 16 valve heads and pistons meant for 8 valve engines don't go together!
#10
Originally posted by Bakeoff
uh, is the 6th gen cx like the 5th gen? 8 valve? if it is, you'd have to swap the whole engine in. 16 valve heads and pistons meant for 8 valve engines don't go together!
uh, is the 6th gen cx like the 5th gen? 8 valve? if it is, you'd have to swap the whole engine in. 16 valve heads and pistons meant for 8 valve engines don't go together!
The 8 valve CX engine has valve reliefs for 16 valves.