Clear guage cover...
Senior Member
Joined: Apr 2003
Posts: 991
Likes: 0
put a razor in the seam and tap with a screw driver till the glue breaks, i already did this and it works, just dont hit it too hard, just tap the razor all the way around the pod. Then just super glue it back, but first clean it with glass cleaner inside and out, then use rubber gloves when u glue it back. super glue fumes will turn white on finger prints, so USE GLOVES. (1.33$ at walmart)
Thread Starter
Registered User
Joined: May 2003
Posts: 633
Likes: 0
From: Chino, CA
Originally posted by Kabooki
put a razor in the seam and tap with a screw driver till the glue breaks, i already did this and it works, just dont hit it too hard, just tap the razor all the way around the pod. Then just super glue it back, but first clean it with glass cleaner inside and out, then use rubber gloves when u glue it back. super glue fumes will turn white on finger prints, so USE GLOVES. (1.33$ at walmart)
put a razor in the seam and tap with a screw driver till the glue breaks, i already did this and it works, just dont hit it too hard, just tap the razor all the way around the pod. Then just super glue it back, but first clean it with glass cleaner inside and out, then use rubber gloves when u glue it back. super glue fumes will turn white on finger prints, so USE GLOVES. (1.33$ at walmart)
