shimmed the rear (camber)
Honorary Moderator Alumni
Joined: Sep 1999
Posts: 8,735
Likes: 0
From: Someplace with cones=AUTO
You're special 
I replaced my brake pads, fluid, rotated my tires, adjusted the toe, and raised the car up 5mm
I replaced my brake pads, fluid, rotated my tires, adjusted the toe, and raised the car up 5mm
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Banned
Joined: Mar 2002
Posts: 8,220
Likes: 0
Originally posted by CivicSiRacer
You're special I replaced my brake pads, fluid, rotated my tires, adjusted the toe, and raised the car up 5mm
You're special
I replaced my brake pads, fluid, rotated my tires, adjusted the toe, and raised the car up 5mm
i cant use the shimmys in the rear yet..i need to roll my fenders first
CockBlockerator
Joined: May 2002
Posts: 1,771
Likes: 0
From: philly pa
Originally posted by ManTiS
How much are those SPC ones going for? Where you buy them at?
How much are those SPC ones going for? Where you buy them at?
they should bring in the lower part of my wheels about .5 inches i think.. thuis fixing camber, but not sticking the wheels out more...
plus the arms are extremyl thick and stiff.
Senior Member
Joined: Jan 2003
Posts: 2,222
Likes: 0
From: SLC, Ut
Originally posted by Tirod˛slc
i rotated my tires and got an alignment.. and cleaned her up again..
i rotated my tires and got an alignment.. and cleaned her up again..