gsr swap

Reply Subscribe

Thread Tools

May 20, 2003 | 09:08 AM

ssbluegsr

Thread Starter

Junior Member

Joined: Mar 2003

Posts: 6

Likes: 0

From: quakertown

gsr swap

I recently totalled my GSR and I am throwing the motor and trans in a 96+ hatch. What will I need to do that. I know I need motor mounts.

May 20, 2003 | 09:10 AM

Tirod

Senior Member

Joined: Jan 2001

Posts: 13,540

Likes: 0

tools :chuckles:

May 20, 2003 | 09:14 AM

madlow

Senior Member

Joined: Jul 2001

Posts: 2,092

Likes: 0

If the GSR is 94+ then it will bolt right in with no troubles using the GSR mounts. And you will have to run a vtec wire which is very easy.

May 20, 2003 | 09:18 AM

ssbluegsr

Thread Starter

Junior Member

Joined: Mar 2003

Posts: 6

Likes: 0

From: quakertown

Thats cool the motor mounts will work. What wire has to be run. What about the rear disc swap, does that bolt right up?

May 20, 2003 | 09:29 AM

spooncivicb16b

Senior Member

Joined: Nov 2002

Posts: 490

Likes: 0

From: landen ohio

i'm pretty sure it does. if not you could try and get the 99-00 si discs

May 20, 2003 | 09:58 AM

Grifter

Senior Member

Joined: Dec 2000

Posts: 44,835

Likes: 0

From: the southwest

you will need wire harness
dont forget ecu
integra lcas will not fit 96+ civics

how is it totaled if you can salvage the engine and rear suspension?

May 20, 2003 | 10:02 AM

SpeedRacerEX-R

Senior Member

Joined: Mar 2002

Posts: 1,108

Likes: 0

You'll use your the dx harness and modify and lengthen the plugs.
You'll also need the 99' Si rear bracket and driver's upper bracket.

May 20, 2003 | 11:22 PM

dantastic

cx power!

Joined: Jun 2002

Posts: 2,435

Likes: 0

From: berkeley, ca --> la, ca representin' tha 510&626

Quote:

Originally posted by SpeedRacerEX-R
You'll use your the dx harness and modify and lengthen the plugs.
You'll also need the 99' Si rear bracket and driver's upper bracket.

:werd: its easiest to adapt the stock harness to the new motor. u need those mounts, but u'll reuse everything else: linkage, axles, fuel pump and feed line to the fuel rail.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump