hate that glare
05-14-2003, 06:27 PM
#22
BOOM goes the dynamite!
Originally posted by Paulll
i dont like the head lights, or the led shit,
the front grill would look best if it was black,
take off the banner thing
del sol seats =
i dont like the head lights, or the led shit,
the front grill would look best if it was black,
take off the banner thing
del sol seats =
05-14-2003, 06:28 PM
#23
Still here... sorta...
Originally posted by Kabooki
and the led wiper thingies, well, i like the chrome more than the oem black, plus i got no switch for the lights, i wired them to my vtec solinoid so they only come on when in vtec.
(the lights are red)
and the led wiper thingies, well, i like the chrome more than the oem black, plus i got no switch for the lights, i wired them to my vtec solinoid so they only come on when in vtec.
(the lights are red)
I feel so horribly bad for your car man. Have you ever been in an accident? Cause if you lived near me I'd aim my car at yours...
That is the :ghey:est thing i've ever heard.... :doh:
You have a long way to go.... :happysad:
05-14-2003, 06:29 PM
#24
Snootchie Bootchies!!
Join Date: Dec 2002
Location: Hawaii
Posts: 2,013
Likes: 0
Received 0 Likes
on
0 Posts
to take off the dizzy you just gotta unbolt it. there are 3 bolts holding it on, if i remember they're 12mm. just unbolt the 3 then pull it out and you will see the o-ring, make sure you have a rag to plug the hole or oil will begin to drip all over your trans.
05-14-2003, 06:30 PM
#26
Senior Member
Thread Starter
Join Date: Apr 2003
Posts: 991
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Paulll
i dont like the head lights, or the led shit,
the front grill would look best if it was black,
take off the banner thing
del sol seats =
i dont like the head lights, or the led shit,
the front grill would look best if it was black,
take off the banner thing
del sol seats =
well, the banner thingie helps with a bright ass sun, its not tinted there
i saw a black grill and kinda like it, i prolly will paint it black now. I gotta wait on the seats though, i poor, for now i tried that vynil repair kit to fix the tear in my passenger seat, um....it kinda worked 
made a mess more than anything though, but is harder to see atleast.
05-14-2003, 06:33 PM
#29
Still here... sorta...
Originally posted by NeverBX
to take off the dizzy you just gotta unbolt it. there are 3 bolts holding it on, if i remember they're 12mm. just unbolt the 3 then pull it out and you will see the o-ring, make sure you have a rag to plug the hole or oil will begin to drip all over your trans.
to take off the dizzy you just gotta unbolt it. there are 3 bolts holding it on, if i remember they're 12mm. just unbolt the 3 then pull it out and you will see the o-ring, make sure you have a rag to plug the hole or oil will begin to drip all over your trans.
05-14-2003, 06:37 PM
#30
owned by a 9 car pile-up
Join Date: Mar 2003
Location: Everett, WA
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Flat black works just fine if you do it properly...
2 coats primer (sand between)
5 coats flat-black paint (THIN coats, let dry between each)
2 coats clear (seals the paint nice & tight...)
it works on bumpers too...
2 coats primer (sand between)
5 coats flat-black paint (THIN coats, let dry between each)
2 coats clear (seals the paint nice & tight...)
it works on bumpers too...