hate that glare
Originally posted by Paulll
i dont like the head lights, or the led shit,
the front grill would look best if it was black,
take off the banner thing
del sol seats =
i dont like the head lights, or the led shit,
the front grill would look best if it was black,
take off the banner thing
del sol seats =
Originally posted by Kabooki
and the led wiper thingies, well, i like the chrome more than the oem black, plus i got no switch for the lights, i wired them to my vtec solinoid so they only come on when in vtec.
(the lights are red)
and the led wiper thingies, well, i like the chrome more than the oem black, plus i got no switch for the lights, i wired them to my vtec solinoid so they only come on when in vtec.
(the lights are red)
I feel so horribly bad for your car man. Have you ever been in an accident? Cause if you lived near me I'd aim my car at yours...
That is the :ghey:est thing i've ever heard.... :doh:
You have a long way to go.... :happysad:
to take off the dizzy you just gotta unbolt it. there are 3 bolts holding it on, if i remember they're 12mm. just unbolt the 3 then pull it out and you will see the o-ring, make sure you have a rag to plug the hole or oil will begin to drip all over your trans.
Originally posted by Paulll
i dont like the head lights, or the led shit,
the front grill would look best if it was black,
take off the banner thing
del sol seats =
i dont like the head lights, or the led shit,
the front grill would look best if it was black,
take off the banner thing
del sol seats =
well, the banner thingie helps with a bright ass sun, its not tinted there
i saw a black grill and kinda like it, i prolly will paint it black now. I gotta wait on the seats though, i poor, for now i tried that vynil repair kit to fix the tear in my passenger seat, um....it kinda worked 
made a mess more than anything though, but is harder to see atleast.
Originally posted by NeverBX
to take off the dizzy you just gotta unbolt it. there are 3 bolts holding it on, if i remember they're 12mm. just unbolt the 3 then pull it out and you will see the o-ring, make sure you have a rag to plug the hole or oil will begin to drip all over your trans.
to take off the dizzy you just gotta unbolt it. there are 3 bolts holding it on, if i remember they're 12mm. just unbolt the 3 then pull it out and you will see the o-ring, make sure you have a rag to plug the hole or oil will begin to drip all over your trans.
Flat black works just fine if you do it properly...
2 coats primer (sand between)
5 coats flat-black paint (THIN coats, let dry between each)
2 coats clear (seals the paint nice & tight...)
it works on bumpers too...
2 coats primer (sand between)
5 coats flat-black paint (THIN coats, let dry between each)
2 coats clear (seals the paint nice & tight...)
it works on bumpers too...


