Integra front end on 92 HB ... HELP!!!
I am Going to do a 94-00 integra front end conversion on my 93 civic h/b and was wondering what I would have to do about the wiring for the headlights and corner lights. I was also wondering if I would have to change my radiator and fans or can I use the civic's? And do I need to change the upper support frame in the front? THanks guys!!
You need:
Headlights
Bumper
Hood
Fenders
Radiator support
Here's what you need to do:
bolt on hood
drill out existing radiator support
cut civic and integra fenders in half
weld front of teggy fender to rear of civic fender
bolt fender on
weld new radiator support on
bolt in headlights and bumper
figure out the wiring for the headlights and corners
sand, bondo, paint
viola
Headlights
Bumper
Hood
Fenders
Radiator support
Here's what you need to do:
bolt on hood
drill out existing radiator support
cut civic and integra fenders in half
weld front of teggy fender to rear of civic fender
bolt fender on
weld new radiator support on
bolt in headlights and bumper
figure out the wiring for the headlights and corners
sand, bondo, paint
viola
Originally posted by Cashis EG8
You need:
Headlights
Bumper
Hood
Fenders
Radiator support
Here's what you need to do:
bolt on hood
drill out existing radiator support
cut civic and integra fenders in half
weld front of teggy fender to rear of civic fender
bolt fender on
weld new radiator support on
bolt in headlights and bumper
figure out the wiring for the headlights and corners
sand, bondo, paint
viola
You need:
Headlights
Bumper
Hood
Fenders
Radiator support
Here's what you need to do:
bolt on hood
drill out existing radiator support
cut civic and integra fenders in half
weld front of teggy fender to rear of civic fender
bolt fender on
weld new radiator support on
bolt in headlights and bumper
figure out the wiring for the headlights and corners
sand, bondo, paint
viola
I wanna know if it's USDM or JDM too.
Originally posted by westcoaststyle
You should post this in the DIY forum.. :rofl:
I wanna know if it's USDM or JDM too.
You should post this in the DIY forum.. :rofl:
I wanna know if it's USDM or JDM too.
Yeah I'll even take pictures of what parts to replace (without actually replacing the parts)
:thumbup:
Originally posted by westcoaststyle
You should post this in the DIY forum.. :rofl:
I wanna know if it's USDM or JDM too.
You should post this in the DIY forum.. :rofl:
I wanna know if it's USDM or JDM too.
Well i was going to go with the USDM front end...i just saw another HB with it, make the front look kinda long compared to the rest of the car. I might consider the JDM front end if I can get my hands on it.
Thanks for the replies so far....keep them coming if you guys got anymore info!:thumbup:
The wiring would be really easy if you have a basic understanding of that kind of stuff. You'd just lengthen the wires that currently go to your corner lights and have them go to the new corners. You will need to add onto those wires for the extra bulb that the teg uses, but that's just as a running light.. pretty easy.
As for voltage, yes, they all use 12V.. you want to know about wattage and it should be 55W just like the civic.
HIH
As for voltage, yes, they all use 12V.. you want to know about wattage and it should be 55W just like the civic.
HIH


