my friend just got his zex kit and evrything is hooked up but we need to know which wire on the throttle position sensor to tap into. thanks

 

well i guess nobody knows but i found out so if any one needs to know its the red and black wire

 

RE: i got a del sol, majority it's the middle wire on the TPS.

 

oh yeah question, what engine do u have? and where to u plug in the 2 vaccum hoses? got any pics would help. thanks.

 

it was in my friends hatch he has a b16, i have a b16a2, sorry no pics

 

you have to test it with a volt meter...chances are its the middle one, likely black, but if in doubt jam a voltmeter prong in the back of the wire where it enters the clip; ignition on, engin off, 1 volt idle position, 4.2 - 5 volts WOT...

 

hose goes to the fuel pressure regulator, the other goes to the manifold...I can see it being confusing becaue the hose that zex gives you is way fatter than the hose you will be removing...thats why they included the hose clamps...you should only remove one factory hose from the engine.