Notices

Please help! First setting of windshield wipers is not working.

Thread Tools
 
Old Jun 29, 2002 | 12:44 AM
  #1  
SHAUNTS99's Avatar
SHAUNTS99
Thread Starter
Member
 
Joined: Mar 2002
Posts: 96
Likes: 0
Default Please help! First setting of windshield wipers is not working.

Setting number one for the windshield wipers is not operating but both the second and third speed settings are functioning properly. I have not checked for any electrical problems as of yet, but the first setting of the windshield wipers is not operating, so i assume it cannot be the motor malfunctioning. I turn it on and nothing, then click to setting two and three and both properly work.

Has anyone else had a similar problem, if so how was it corrected?

Are there separate fuses for each of the three wiper speed settings?

How can I correct this or check for possible electrical problems instead of replacing the entire assembly?

I appreciate any help, thanks.
Reply
Old Jun 29, 2002 | 04:25 AM
  #2  
Fujiwara Takumi's Avatar
Fujiwara Takumi
It's my first day.
 
Joined: Nov 2001
Posts: 13,635
Likes: 0
From: Grafton, WI.
Default

i could _almost_ guarantee the pot that controls the settings is wearing out or corroded. My guess is you would have to tear down the steering column and fix the stem.

The motor _could_ be damaged as well. If the brushes are shot it will not be able to kick in at lower power. I might turn the wipers on and take a volt meter to the hood...you know, measure off the wiper motor and see if its being powered when on that first setting. that will tell you if the motor is busted, or if the switch/pot is busted.
Reply
Old Jun 29, 2002 | 05:37 AM
  #3  
SHAUNTS99's Avatar
SHAUNTS99
Thread Starter
Member
 
Joined: Mar 2002
Posts: 96
Likes: 0
Default

That's a good plan, looks like I need to clear a time slot to do this and figure out what the problem is. Hopefully it is just some loose wiring or a blown fuse. Thanks

Anyone else experiencing this in a 96-00 Honda Civic coupe?
Reply
Old Jun 29, 2002 | 05:57 AM
  #4  
Fujiwara Takumi's Avatar
Fujiwara Takumi
It's my first day.
 
Joined: Nov 2001
Posts: 13,635
Likes: 0
From: Grafton, WI.
Default

Originally posted by SHAUNTS99
That's a good plan, looks like I need to clear a time slot to do this and figure out what the problem is. Hopefully it is just some loose wiring or a blown fuse. Thanks

Anyone else experiencing this in a 96-00 Honda Civic coupe?

no, not at all, and i use the piss outta my wipers. we get a lot of rain here.
Reply
Old Jun 29, 2002 | 06:12 AM
  #5  
SHAUNTS99's Avatar
SHAUNTS99
Thread Starter
Member
 
Joined: Mar 2002
Posts: 96
Likes: 0
Default

You get a lot of rain through Racine? I am from GB, I do not even have to tell you what those initials are for because I am sure all Wisconsin people know what GB stands for (not that I stand for P---kers, either though) Anyway, I am down in Florida now, so I use my wipers quite a bit, but I haven't the slightest clue why it would just die like that. If it is the switch itself I am going to be kicking myself in the a-- for selling a spare one I had out of a GSR

If you still need help on the sunroof opinion let me know, maybe I could find some other reasons not to get it.
Reply
Old Jun 30, 2002 | 06:16 PM
  #6  
Fujiwara Takumi's Avatar
Fujiwara Takumi
It's my first day.
 
Joined: Nov 2001
Posts: 13,635
Likes: 0
From: Grafton, WI.
Default

Originally posted by SHAUNTS99
You get a lot of rain through Racine? I am from GB, I do not even have to tell you what those initials are for because I am sure all Wisconsin people know what GB stands for (not that I stand for P---kers, either though) Anyway, I am down in Florida now, so I use my wipers quite a bit, but I haven't the slightest clue why it would just die like that. If it is the switch itself I am going to be kicking myself in the a-- for selling a spare one I had out of a GSR
i think green bay gets as much rain as we do, but its not uncommon for us to get 2-3" in a day. When are you back in town? There is a meet in waukesha pretty quick


If you still need help on the sunroof opinion let me know, maybe I could find some other reasons not to get it.
Reply
Old Jun 30, 2002 | 07:00 PM
  #7  
crucial Si's Avatar
crucial Si
Banned
 
Joined: Mar 2002
Posts: 8,220
Likes: 0
Default

Originally posted by fujiwara takumi
i could _almost_ guarantee the pot that controls the settings is wearing out or corroded. My guess is you would have to tear down the steering column and fix the stem.

The motor _could_ be damaged as well. If the brushes are shot it will not be able to kick in at lower power. I might turn the wipers on and take a volt meter to the hood...you know, measure off the wiper motor and see if its being powered when on that first setting. that will tell you if the motor is busted, or if the switch/pot is busted.

:werd:

welcome to the gang..your not the only it doesnt work for......

also my cruise control buttons dont work like fujiwara said your gonna have to tear the steering column and my mech told me its an expensive little part....im going to find out how expensive.

oh yeah also when my sister had her 93 dx it also didnt work and on my boys 95 it also doesnt work(first setting on wipers)

also when you want to give it a quick wipe with the wipers does it stop when you let go of it or does it go back down like it is suppost to?!?!?!?!?
Reply
Old Jun 30, 2002 | 07:03 PM
  #8  
Fujiwara Takumi's Avatar
Fujiwara Takumi
It's my first day.
 
Joined: Nov 2001
Posts: 13,635
Likes: 0
From: Grafton, WI.
Default

parts are usually reasonable, its the labor that costs so much
Reply
Old Jun 30, 2002 | 07:21 PM
  #9  
Jeice's Avatar
Jeice
One Rad Dude
 
Joined: Mar 2002
Posts: 339
Likes: 0
From: Northwest Houston
Default

the INT fuse is blown. replace it
Reply
Old Jun 30, 2002 | 07:46 PM
  #10  
crucial Si's Avatar
crucial Si
Banned
 
Joined: Mar 2002
Posts: 8,220
Likes: 0
Default

Originally posted by fujiwara takumi
parts are usually reasonable, its the labor that costs so much
not really...i go to honda and i tell them i work at this place that has an account w/ them and boom i get a 40% discount and i have my mech do it for next to nothing...im going to call up tomorrow and ask them how much
Reply



All times are GMT -8. The time now is 11:32 PM.