Vavle Adjustment Tool making my own, will this work? *pic*
Thread Starter
Member
Joined: Sep 2002
Posts: 63
Likes: 0
From: Syracuse, NY
Vavle Adjustment Tool making my own, will this work? *pic*
Would this work if i got a regular 10MM deep socket wrench, and just welded a pipe or wrench to the top of it so the top was still open for the screw driver? Would a deepsocket go down far enough on the nut?
91' Toyota Supra
Joined: Dec 2002
Posts: 3,809
Likes: 0
From: Iwakuni, Japan. And where ever the Marine Corps sends me
well how deep is this socket there are different sizes if you didn't know that (for deep sockets). and as far as i know there shouldn't be any problem for it to go down far enough and fro the handle hitting something no
91' Toyota Supra
Joined: Dec 2002
Posts: 3,809
Likes: 0
From: Iwakuni, Japan. And where ever the Marine Corps sends me
yeah some are just longer is all what i suggest is get the one your gonna weld the handle to and test ot out see if there is enough claerence and all that happy shiat ok :bigok:
So OG it hurts.
Joined: Mar 1999
Posts: 6,592
Likes: 0
From: VA
i just purchased the snap on tool for valve adjustments
it has the flat head screw driver for adjustment and the socket around the flat head to tighten up the bolt.
it'd suggest getting that. :thumbup:
it has the flat head screw driver for adjustment and the socket around the flat head to tighten up the bolt.
it'd suggest getting that. :thumbup: