anybody put this on a 99-00 Si? I can a great deal on one for under$100. itr sway bar, itr endlinks, all d brackets & prothane bushing kit included :thumbup:

post pics if have 'em.

 

if you do this, you don't need the itr endlinks. you need the Si endlinks. Also, you will need the si mounting brackets to connect to the subframe

 

i would need the ITR mounting brackets because the ITR bar is larger...wouldn't I?

Have pics?

 

Okay, If you have a 99-00 Si, you already have a rear sway bar.

if that's the case, you will only need to get the ITR rear sway bar, and the D-brackets for the ITR.

I would also recommend that you get a reinforcement kit for the subframe. like the beaks kit.

If you Don't have an 99-00 Si, you will need Si endlinks, and the Si mounting brackets. as well.

 

yeap

thanks. alls i need then is the beaks kit.

 

definitely get the beaks kit though...this is not one of those things you should do half assed, because if you do, you'll tear your subframe, and you'll be fawked

 

Get the BSQ or Beaks kit to reinforce that subframe. Tearing it out will make your life miserable. Good buy on the bar :thumbup:

 

thanks all...