96-98 rear lip on a 99-00
03-16-2003, 05:06 PM
#1
Senior Member
Thread Starter
Join Date: Jun 2002
Location: Houston
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
96-98 rear lip on a 99-00
what's up,
ive seen a lot of ppl do this, i was just wondering if ne1 could tell me what modifications would be needed to make it fit properly, thanks.
ive seen a lot of ppl do this, i was just wondering if ne1 could tell me what modifications would be needed to make it fit properly, thanks.
03-16-2003, 06:19 PM
#3
Senior Member
Join Date: May 2002
Location: Rockland County, NY
Posts: 3,021
Likes: 0
Received 0 Likes
on
0 Posts
Check out this thread:
https://www.honda-acura.net/forums/s...light=rear+lip
SiClone on here did it, and here's what he said about modifications:
I have that lip on my '98 and it is very 
looking.
Oh yeah, Txek9, you are SOL on the OEM rear lip...it doesn't fit on hatches because their rear bumper is different...its only for coupes and sedans.
https://www.honda-acura.net/forums/s...light=rear+lip
SiClone on here did it, and here's what he said about modifications:
Originally posted by SiClone
It took an hour. I had to take my Dremel and shave off the interior rivets holding the metal clips that are on the 96-98 lip before I could pull them off. Those clips need to be removed in order for the lip to fit on a 99-00 rear bumber. After that, it was pretty straight forward.:thumbup:
It took an hour. I had to take my Dremel and shave off the interior rivets holding the metal clips that are on the 96-98 lip before I could pull them off. Those clips need to be removed in order for the lip to fit on a 99-00 rear bumber. After that, it was pretty straight forward.:thumbup:
looking.Oh yeah, Txek9, you are SOL on the OEM rear lip...it doesn't fit on hatches because their rear bumper is different...its only for coupes and sedans.
03-16-2003, 09:45 PM
#4
Senior Member
Thread Starter
Join Date: Jun 2002
Location: Houston
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by str8edgexx
Check out this thread:
https://www.honda-acura.net/forums/s...light=rear+lip
SiClone on here did it, and here's what he said about modifications:
I have that lip on my '98 and it is very looking.
Oh yeah, Txek9, you are SOL on the OEM rear lip...it doesn't fit on hatches because their rear bumper is different...its only for coupes and sedans.
Check out this thread:
https://www.honda-acura.net/forums/s...light=rear+lip
SiClone on here did it, and here's what he said about modifications:
I have that lip on my '98 and it is very
looking.Oh yeah, Txek9, you are SOL on the OEM rear lip...it doesn't fit on hatches because their rear bumper is different...its only for coupes and sedans.