Auto Tranny Question/Problem...help!!
Thread Starter
Registered Rota Dealer
Joined: May 2002
Posts: 2,805
Likes: 0
From: Bay Area, California
So I broke the axle on my hatch and I need to get that fixed soon, but now my automatic everyday sedan is having trouble with the automatic tranny
Everytime I gas hard or let the rev's get above roughly 3k, the engine just revs and the car doesn't accelerate. Usually this happens most often when the tranny is trying to downshift. I'm guessing its the torque converter, but I don't really know jack about these auto trannies
Anybody have any suggestions? I want to get this fixed as this is my daily driver and my hatch doesn't run right now either..
Everytime I gas hard or let the rev's get above roughly 3k, the engine just revs and the car doesn't accelerate. Usually this happens most often when the tranny is trying to downshift. I'm guessing its the torque converter, but I don't really know jack about these auto trannies
Anybody have any suggestions? I want to get this fixed as this is my daily driver and my hatch doesn't run right now either..
i have a d-series automatic tranny that i will sell you if you are interested i am pulling out of my hatch on friday to put in a b16 and am going manual
just let me know oh and its from a 92 dx hatch about 105xxx miles runs real strong
just let me know oh and its from a 92 dx hatch about 105xxx miles runs real strong
I've got a torque converter I'd sell you for like 20 bucks plus shipping. The other thing to check out is the cable that runs from the tranny to the throttle body. Make sure it's not too tight, or too loose...
Thread Starter
Registered Rota Dealer
Joined: May 2002
Posts: 2,805
Likes: 0
From: Bay Area, California
Thanks for the suggestion guys, I'm going to go reset the ECU and check the cable tomorrow. Hope it solves the problem, if not I might need that torque converter or tranny :thumbup:


