Found a turbo kit, you think its any good?
02-14-2003, 09:04 AM
#1
Civic GSR Driver
Thread Starter
Join Date: Mar 2002
Location: Frederick, MD
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Found a turbo kit, you think its any good?
I was looking on Ebay for a turbo for my car and I came across this. Do you think the price seems a little to good to be true? He said its wholesale cost. Do you think its a fairly good setup?
We currently have a turbo kit for your car intercooled
for 14psi $1450+85 shipping (model #166783) or non
intercooled 8psi $1200+65shipping (model #166782) .
All kits come with everything needed for install. This
kit comes with a T-4 series 20G turbo witch is
equivlent if not better than a drag 3 kit.
The Inercooled kit Includes;
*t3/t4 Series Turbo w/ 20Gn Intake Housing and 276/12
Turbine, 19c Exhaust Housing 7cm Boreout and 10 Degree
Cold Side Clip.
*Front Mount Large Dual Spline 2 Core Intercooler
*Mendral Bent I/C Piping
*HKS SS Blow off Valve
*Tail 38mm Wastegate
*Cast Exhaust Manifold and Downpiping
*Oil Lines and T's
*Walebro 255lph Fuel Pump and Lines
*Boost Gauge
*All Necessary Gaskets and Bolts
*Silicone Pipe Fitings and Necessary Tie Downs
*K&N High Flow Conical Filter
*Mendral Bent 3" Downpipe
*Ceramic Honed and Bored 02 Housing
We currently have a turbo kit for your car intercooled
for 14psi $1450+85 shipping (model #166783) or non
intercooled 8psi $1200+65shipping (model #166782) .
All kits come with everything needed for install. This
kit comes with a T-4 series 20G turbo witch is
equivlent if not better than a drag 3 kit.
The Inercooled kit Includes;
*t3/t4 Series Turbo w/ 20Gn Intake Housing and 276/12
Turbine, 19c Exhaust Housing 7cm Boreout and 10 Degree
Cold Side Clip.
*Front Mount Large Dual Spline 2 Core Intercooler
*Mendral Bent I/C Piping
*HKS SS Blow off Valve
*Tail 38mm Wastegate
*Cast Exhaust Manifold and Downpiping
*Oil Lines and T's
*Walebro 255lph Fuel Pump and Lines
*Boost Gauge
*All Necessary Gaskets and Bolts
*Silicone Pipe Fitings and Necessary Tie Downs
*K&N High Flow Conical Filter
*Mendral Bent 3" Downpipe
*Ceramic Honed and Bored 02 Housing
02-14-2003, 07:33 PM
#4
Civic GSR Driver
Thread Starter
Join Date: Mar 2002
Location: Frederick, MD
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
i found out they are selling them at cost to get their name around. I emailed them so hopefully if i can scrounge up the money they will let me in on the deal 
Then project 12 sec civic will take one more step forward!
Then project 12 sec civic will take one more step forward!
02-14-2003, 07:34 PM
#5
Civic GSR Driver
Thread Starter
Join Date: Mar 2002
Location: Frederick, MD
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
its over now, it was an add not meant to be bid on. They had all possitive feedback on their name. You were supposed to email them and go from there or somethign i dunno. Im still waiting for them to respond. Needa make sure its legit and what not.
