Integra Dash conversion?
My buddy is buying a used '98 Integra LS($800 for the complete car/no title/rear-end damage) and offered me everything on the inside. I am wondering about swapping my dash for the Teg one. I have a couple Q's about that:
--Will the Teg dash fit?
--If so, can I get ITR door panels and will those fit?
--Are all Teg dashes the same? What the difference between non-ITR dashes and ITR dashes?
Last question: Are there any REAL Type R door panels I can use in a 95 coupe? I know CTR won't fit, but I thought maybe swapping the Teg dash with the ITR panels might do it.
Help me out.
Spike
P.S. Will the cloth LS seats fit into my coupe without modifications? The rear as well(the teg is a 2 dr)?
--Will the Teg dash fit?
--If so, can I get ITR door panels and will those fit?
--Are all Teg dashes the same? What the difference between non-ITR dashes and ITR dashes?
Last question: Are there any REAL Type R door panels I can use in a 95 coupe? I know CTR won't fit, but I thought maybe swapping the Teg dash with the ITR panels might do it.
Help me out.
Spike
P.S. Will the cloth LS seats fit into my coupe without modifications? The rear as well(the teg is a 2 dr)?
as long as you have the rails, the seats will fit without modification
you need the seats from a 4 door to do the rear, even then they don't fit very well.
the dash can go in, but it a HUGE pain in the ass. It is not a bolt in operation, you have to rewire your wiring harness, and you will have larger than factory gaps in some areas, and it will pretty muhc be zip tied in place. It has been done, it can be done, but it is not fun or easy.
the door panels do not fit, too short/odd sized.
I know all this because I have a teg interior sitting in my basement... not installed
h:
you need the seats from a 4 door to do the rear, even then they don't fit very well.
the dash can go in, but it a HUGE pain in the ass. It is not a bolt in operation, you have to rewire your wiring harness, and you will have larger than factory gaps in some areas, and it will pretty muhc be zip tied in place. It has been done, it can be done, but it is not fun or easy.
the door panels do not fit, too short/odd sized.
I know all this because I have a teg interior sitting in my basement... not installed
h:
I'd recommend against it unless you have TONS of time on your hand. Even then, you'll have to cut parts of your door panels to make it fit. Sure the dash is cool, but its pretty ghetto once you open your doors.
Originally posted by Cashis EG8
I'd recommend against it unless you have TONS of time on your hand. Even then, you'll have to cut parts of your door panels to make it fit. Sure the dash is cool, but its pretty ghetto once you open your doors.
I'd recommend against it unless you have TONS of time on your hand. Even then, you'll have to cut parts of your door panels to make it fit. Sure the dash is cool, but its pretty ghetto once you open your doors.
Not worth the hastle or the end result imo...
All right. I'll skip it. I don't have time and don't want a ghetto looking car.
Are there any Type R door panels I can get for my 5gen coupe? Do CTR or ITR panels fit with/out modifications?
Spike
Are there any Type R door panels I can get for my 5gen coupe? Do CTR or ITR panels fit with/out modifications?
Spike
integra panels do NOT fit.
If you want your door panels spruced up, go to a reupholstering place.
white lightnin:
I'd consider parting with my dash and whatnot... It would cost a ****load to ship it though, where do you live?
If you want your door panels spruced up, go to a reupholstering place.
white lightnin:
I'd consider parting with my dash and whatnot... It would cost a ****load to ship it though, where do you live?



