I have a set of DC2 Cusco coilovers, I was wondering if I could install these on an ek? What mods would I need? I have SRR LCA's if that makes any difference.

 

USDM or JDM DC? For USDM, you just need some spacers to fill the void between the rear LCA's and the lower damper mounts because EK rear LCA's aren't as thick as EG/DC ones. If they're JDM DC2 coilovers, I don't tink you'll be able to use them since you would need to run JDM DC2 rear LCA's, and DC LCA's don't bolt on to EK's(they're too short, for one thing). The fronts will go right in. The SRR LCA's won't make a difference since they retain all the stock mounting points.

 

thanks, that cleared a lot of things up. Do you know if the shock lengths differ?

 

Damper length between EG/DC and EK should be the same, unless it's a short-body coilover, which some are.