I Can't for the life of me figure out how to remove the dash to pull out the Gauge Blob.

I'm a Noob to this car, but not to technical crap, so please any help is appreciated.

poisonfree10@hotmail.com

 

get a manual for your car, that helped so much when i installed my sub

 

You need to disassemble most of the dash to get to your gauge cluster. There are screws hidden in places like your A/C vents and behind your hazard light button.

 

yeah My Girl is getting me a book for Xmas (Hey 15$ is 15$)

But i don't want to wait to pull it out, i need to maybe lube my speedometer (It sticks sometimes?) or just replace the whole Gauge Cube (Like 100$ on ebay) and also wanna put in the super tacky Indiglow gauge faces.

thanks for the tip, It's really appreciated both of you!

 

If it's an auto, or you don't mind having the indicator, I have an extra one for sale. It's from a 95 ex auto. Indiglos would cover up the auto indicator.

 

Email me a Picture and a Price! I'm flat broke for the next week or so tho, I hate Christmas.

 

I'd recommend taking out the fuse of the airbag, or disconnecting your battery just to be on the safe side before starting. There are 2 screws near the top of the gauges, and 1 screw at the clock in front. You pry out the hazaard button as well. After that, you should see 4 screws holding in the gauge cluster.

 

We have the exact same car. PM me if you want me to help you out. :thumbup:

 

thanks for all the help i got it in,

there were 3 screws ... 2 on the top and one behind the hazard button, just had to pry out the black dash part then remove the meter-Pod with 4 scres on the sides.
westcoaststyle is a pimp. thanks

 

h: :naughty: