Headlights
Thread Starter
Member
Joined: Feb 2007
Posts: 85
Likes: 0
Headlights
What's up Ya'll, I had a question about my headlights I know this sound like a dumb question but, Ima ask any way. Both of my headlights are out but I can still use my highs, my question is before the lows went out they would flicker, then after they warmed up they would stay on but now they don't work at all, could it be that they both headlights are out and need to be replaced or could their be short somewhere? (I havent changed them yet because I dont know if they need to be) 02 civic ex
Honorary Moderator Alumni
Joined: Sep 1999
Posts: 8,735
Likes: 0
From: Someplace with cones=AUTO
The low and high beams are 2 different wires in the bulb itself. Can you try out someone's bulbs to see?
Low beams are a low intentsity wire and the high beams are a higher intentsity wire (this being from memory of course). Just like a 3 way light bulb in your house, you will notice 3 wires inside the bulb.
Low beams are a low intentsity wire and the high beams are a higher intentsity wire (this being from memory of course). Just like a 3 way light bulb in your house, you will notice 3 wires inside the bulb.
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
sancho on the sizzide!
Joined: Aug 2000
Posts: 27,129
Likes: 0
could possibly that both your low beam filament is blown. Pull the bulb to see if the filaments are ok.
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info