How low should i go? Lowering Springs
Thread Starter
Junior Member
Joined: Feb 2008
Posts: 29
Likes: 0
How low should i go? Lowering Springs
i have some skunk2 coilovers right now...and im not happy with them. i want to get some lowering springs so the car will be level on all for struts. i have some skunk2 shocks...what kind of springs should i get to go along with these? and how low should i lower it? i think the legal limit on a lowered car is 23 inches. but i cant find anything on how high the factor springs are. so how many inches should i lower it to keep it legal?
Thread Starter
Junior Member
Joined: Feb 2008
Posts: 29
Likes: 0
i live in sacramento...having a lowered car is not very popular to the cops...ive gotten pulled over twice on the same street, same corner within 15 mins of each other. i was going to pick up some chicken wings from wingstop. got pulled over once going to the place and another coming back. just my luck i guess. i was a half inch too low, but they let me go that night. i hate tickets and trying to avoid another.
so i dont want to go too low...plus i dont want to be scraping the bottom of the car all the time like other people. just not cool in my book. my coilovers are set at the right height right now. still looks low enough. but like i said theyre not perfect. so how many inches should i lower it to have it at 23 inches? meaning from the ground up to the mark on the headlights.
so i dont want to go too low...plus i dont want to be scraping the bottom of the car all the time like other people. just not cool in my book. my coilovers are set at the right height right now. still looks low enough. but like i said theyre not perfect. so how many inches should i lower it to have it at 23 inches? meaning from the ground up to the mark on the headlights.
Honorary Moderator Alumni
Joined: Sep 1999
Posts: 8,735
Likes: 0
From: Someplace with cones=AUTO
Umm then raise it back up so you don't get pulled over - duh.
1st thing you need to do is measure each corner to figure out how much to raise each corner to level out the car.
Then set the car back down and measure again with your weight in the driver's seat and measure one more time. you want to get each corner without about 1-2mm.
Then get an alignment.
1st thing you need to do is measure each corner to figure out how much to raise each corner to level out the car.
Then set the car back down and measure again with your weight in the driver's seat and measure one more time. you want to get each corner without about 1-2mm.
Then get an alignment.
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Thread Starter
Junior Member
Joined: Feb 2008
Posts: 29
Likes: 0
Umm then raise it back up so you don't get pulled over - duh.
1st thing you need to do is measure each corner to figure out how much to raise each corner to level out the car.
Then set the car back down and measure again with your weight in the driver's seat and measure one more time. you want to get each corner without about 1-2mm.
Then get an alignment.
1st thing you need to do is measure each corner to figure out how much to raise each corner to level out the car.
Then set the car back down and measure again with your weight in the driver's seat and measure one more time. you want to get each corner without about 1-2mm.
Then get an alignment.
Senior Member
Joined: Jul 2004
Posts: 154
Likes: 0
I have a local friend here that hit a bump on the freeway in his lowered integra. the tire rubed the top of the fender and shreded off the top layer of rubber. he did a 360 and hit the center divider. I think his car was too low. He had some nice 17" low profile rims with low pros on them!
