If I want polyurethane bushings for a 95 Civic EX coupe with a GSR rear disc swap will the integra bushings work for the front?
Or do I need civic bushings for the front, and teg bushings for the back??

 

When i ordered my ES master bushing kit, i talked to the shop owner for about 20 minutes about all kinds of things... of of them was that the front bushings are the same between civic and teg, and that the rear ones are different. You will need to order a teg kit, and that will work fine, except for a few odditied like shifter bushings, unless you have an engine swap.

 

Hey, thanks a lot camo! Is the squeaking that bad? Are the bushings worth it in your opinion?

 

When I did my full kit I asked for a teg kit. ANd within the package some of the piees said civic on them. I think they are pretty interchangeable. I hope you have fun installing it.

 

only get the rear teg bushings if you changed the rear lca's too.

If you kept your stock rear lca's, then just get the civic bushings all around.

 

DOH!

thats true. I forgot to mention that h:

 

How much do the bushings go for (just for the rear LCA's for the teggy)? Might as well replace mine when I do the swap.

 

i havn't had a chance to install them yet, but i got the graphite impregnated bushings which are supposed to be 'self lubricating' and shouldn't sqeak.

for JUST the rear LCA's? No idea, call up a place that carries them. Shouldn't be too much, maybe $15-40? guestimate

 

Okay, while I'm doing it I plan on getting the teg LCA's so I can add the ITR sway bar in the future. Thanks for the info!