trouble starting my sol

Reply Subscribe

Thread Tools

Feb 10, 2008 | 09:00 PM

fast del sol

Thread Starter

Junior Member

Joined: Feb 2008

Posts: 8

Likes: 0

trouble starting my sol

my sol wont start. ive tried a new main relay and checked all the fuses. my fuel pump doesnt turn on when i turn the key foward. i dont know what else to do someone please help

Feb 11, 2008 | 05:22 AM

Line7

Platinum Member

Joined: Jun 2006

Posts: 1,266

Likes: 0

From: cardboard box

well its obvious you need a new fuel pump.

Feb 11, 2008 | 05:57 AM

Running925

Your Powder Coater

Joined: Mar 2004

Posts: 4,463

Likes: 0

From: Girard, Ohio

check main relay.. check ecu fuse.. if that failes.. try to jump your fuel pump to see if it will prime or not.. if it doesn't then u'r pump took a shit.

Feb 11, 2008 | 07:48 PM

fast del sol

Thread Starter

Junior Member

Joined: Feb 2008

Posts: 8

Likes: 0

ok ive already direct wired the fuel pump and it kicks on. im also not getting any spark i believe. will the ignition module have anything to do with both not working?

Feb 11, 2008 | 11:14 PM

Chris_Baker86

Junior Member

Joined: Feb 2008

Posts: 22

Likes: 0

Sure its not your main relay, sounds like the same problem I had & thats what was wrong with mine...

Feb 21, 2008 | 09:04 PM

fast del sol

Thread Starter

Junior Member

Joined: Feb 2008

Posts: 8

Likes: 0

i went thru five different main relays

Feb 23, 2008 | 05:58 AM

spoon-eg-

Senior Member

Joined: Aug 2006

Posts: 100

Likes: 0

get a test light and unplug the fuel pump and check if your gettin power to it. if you are then its the fuel pump.check the grounds on the engine also. just something i would do

Mar 6, 2008 | 05:55 PM

fast del sol

Thread Starter

Junior Member

Joined: Feb 2008

Posts: 8

Likes: 0

ok i found da fuel problem, now it still still wont start. ive tried a new distirbutor and computer, plugs, cap, rotor button and it still wont fire. does anybody think it can be a timing problem or what?

Mar 8, 2008 | 01:24 AM

A-series

v-card member alpha

Joined: Oct 2006

Posts: 4,010

Likes: 0

From: Assplosion, NE

Assuming you tried a new ignitor/ignition module when you tried the new distributor, did you check for power at the wires that attach to the ignitor?

Mar 9, 2008 | 07:45 AM

#10

fast del sol

Thread Starter

Junior Member

Joined: Feb 2008

Posts: 8

Likes: 0

i feel really stupid now. the wires on the distributor were wrong

but now its runnin a lil rough so im gonna play wit the distributor change the wires and stuff cuz its been sittin a while. i dont have any vacuum leaksso imma try dat

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump