B18B plug & play my aassssssssssss..
10-16-2002, 09:22 AM
#1
Senior Member
Thread Starter
Join Date: Jul 2001
Posts: 2,092
Likes: 0
Received 0 Likes
on
0 Posts
B18B plug & play my aassssssssssss..
I installed a 94 B18B into my 94 civic ex coupe this past weekend..
Most of the swap was self-explanatory. Although, you do come across complications I was not expecting. There are 3 wire harnesses on both sides of the of the engine bay near the firewall. Two on each side plugged in but the other one had to be spliced and modified to the integra harness. Leaving the like 2 extra wires on both sides. This may be only because of vtec and possibly AC but I’m not sure. The other thing being you need to use the civic mounts and the integra brackets for the 2 front lower mounts. And the last issue that I ran into was the exhaust. The civic exhaust pipe had a different flange and had a smaller diameter than the integra catalytic converter. The integra exhaust pipe was too short after the catalytic converter. You could cut the integra exhaust pipe, add on an extension, and get an integra muffler but I decided to get a custom 2.5” exhaust bent for $135.00.
All in all, the swap was very self-explanatory, just reversing the pulling of the stock motor. Although, I did find it easier to drop the motor from under the car instead of pulling the motor and doing the same when installing it. I did this with a large come-along and a floor jack.
My next modification will be the swapping out the integra dash and all seats into my civic. And I have a zex kit that should be here any day.
Pix will soon be posted.
Most of the swap was self-explanatory. Although, you do come across complications I was not expecting. There are 3 wire harnesses on both sides of the of the engine bay near the firewall. Two on each side plugged in but the other one had to be spliced and modified to the integra harness. Leaving the like 2 extra wires on both sides. This may be only because of vtec and possibly AC but I’m not sure. The other thing being you need to use the civic mounts and the integra brackets for the 2 front lower mounts. And the last issue that I ran into was the exhaust. The civic exhaust pipe had a different flange and had a smaller diameter than the integra catalytic converter. The integra exhaust pipe was too short after the catalytic converter. You could cut the integra exhaust pipe, add on an extension, and get an integra muffler but I decided to get a custom 2.5” exhaust bent for $135.00.
All in all, the swap was very self-explanatory, just reversing the pulling of the stock motor. Although, I did find it easier to drop the motor from under the car instead of pulling the motor and doing the same when installing it. I did this with a large come-along and a floor jack.
My next modification will be the swapping out the integra dash and all seats into my civic. And I have a zex kit that should be here any day.
Pix will soon be posted.
10-16-2002, 09:36 AM
#2
sancho on the sizzide!
Join Date: Aug 2000
Posts: 27,129
Likes: 0
Received 0 Likes
on
0 Posts
what year is ur civic?
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
10-16-2002, 10:38 AM
#5
Senior Member
Thread Starter
Join Date: Jul 2001
Posts: 2,092
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by wilsel
How many hours did it take you?
How many hours did it take you?
.Hows it feel?
10-17-2002, 02:14 AM
#9
Senior Member
Join Date: Mar 2002
Posts: 1,108
Likes: 0
Received 0 Likes
on
0 Posts
Re: B18B plug & play my aassssssssssss..
Originally posted by madlow
There are 3 wire harnesses on both sides of the of the engine bay near the firewall. Two on each side plugged in but the other one had to be spliced and modified to the integra harness.
There are 3 wire harnesses on both sides of the of the engine bay near the firewall. Two on each side plugged in but the other one had to be spliced and modified to the integra harness.