head gasket blown? need help figuring this out
#11
Senior Member
Thread Starter
Join Date: Sep 2006
Location: rhode island
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
well i started it up today and there was no smoke... until i revved it up a little then there was just a little but no water leaking.... im thinking to just replace the gaskets and what not and it will probably be fine
#12
v-card member alpha
Join Date: Oct 2006
Location: Assplosion, NE
Posts: 4,010
Likes: 0
Received 0 Likes
on
0 Posts
Could also be piston rings or the oil-control ring on the piston, but valve stem seals are more common. If so, that problem isn't too expensive whether you have them replaced (head doesn't need removed) or you just try something with seal conditioner to soften up the old seals, assuming none of them are cracked and beyond repair.