ok i've run into a minor problem with my trailing arm on the driver side.. does anyone know how much thread is actually up in the frame? and does anyone know of anybody tapping the threads and using a bigger bolt? the bushing holes where the bolt goes in isn't that big at all.. just wondering if anybody has had a problem with these bolts going into the frame and what you did to fix this..


i was thinking i could drill the bushing holes out bigger for a bigger bolt.. any help would be appreciated... shits pissen me off yo the other side went together puuuurfect



my car is kinda rusted in the rear panels and im wondering if the rust has eatin away at the threads, or possibly part of the frame... bolts don't seem to go in there easy at all..