A/C Compressor Pulley
Thread Starter
Junior Member
Joined: Sep 2007
Posts: 1
Likes: 0
A/C Compressor Pulley
Hello,
Recently, my '95 Civc Ex A/C was making a dry barring noise. What would I need to do to pull the pulley off the compressor so I can replace it? The service manual I have completely skirts the air-conditioning topic, citing legal ramifications with the EPA.
-Thanks
Recently, my '95 Civc Ex A/C was making a dry barring noise. What would I need to do to pull the pulley off the compressor so I can replace it? The service manual I have completely skirts the air-conditioning topic, citing legal ramifications with the EPA.
-Thanks
Senior Member
Joined: Oct 2006
Posts: 1,335
Likes: 1
http://www.tooltopia.com/index.asp?P...OD&ProdID=8015
You will need this to hold the clutch still while turning the nut loose or just keep the belt on. Some snap ring pliers and some feeler gauges to set the clutch clearance. It is essayer with the compressor off. Get the freon drained and re filled.
Good place to get a book it will have all the ac info. http://www.helminc.com/helm/welcome_...P19BV9LM7FACP8
You will need this to hold the clutch still while turning the nut loose or just keep the belt on. Some snap ring pliers and some feeler gauges to set the clutch clearance. It is essayer with the compressor off. Get the freon drained and re filled.
Good place to get a book it will have all the ac info. http://www.helminc.com/helm/welcome_...P19BV9LM7FACP8