Notices

Help needed for Stoping AC leak

Thread Tools
 
Old Jul 11, 2007 | 06:12 PM
  #1  
sameerapte's Avatar
sameerapte
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 2
Likes: 0
Default Help needed for Stoping AC leak

Hi,

I have 1993 Honda Civic LX (Sadan). The AC has started leaking all of a sudden. First I thought that I need to refill the R134. While recharging R134, I noticed that the green colored liquid is coming out of the pipe near the High end. After proper inspecting, I found that there is a leak in the join, where the pipe is joined to the base socket (Image attached).
Is there any way to stop this leak ?

Regards,
Sameer
Attached Images
File Type: jpg
acleak.JPG (2.7 KB, 43 views)
Reply
Old Jul 12, 2007 | 01:28 AM
  #2  
Civic2Scooby's Avatar
Civic2Scooby
 
Joined: Jul 2003
Posts: 28,282
Likes: 0
From: michigan
Default

yup...replace the o-ring found at the joint. You would need to evacuate the system properly, disconnect the joint replace the o-rings and recharge.
Reply
Old Jul 12, 2007 | 08:10 PM
  #3  
audiokong's Avatar
audiokong
Member
 
Joined: Jul 2007
Posts: 35
Likes: 0
From: ohio
Default

Originally Posted by Civic2Scooby
yup...replace the o-ring found at the joint. You would need to evacuate the system properly, disconnect the joint replace the o-rings and recharge.
agreed and just something to add anytime you open an ac system you need to replace the dryer to
Reply
Old Jul 13, 2007 | 02:24 AM
  #4  
Civic2Scooby's Avatar
Civic2Scooby
 
Joined: Jul 2003
Posts: 28,282
Likes: 0
From: michigan
Default

Originally Posted by audiokong
agreed and just something to add anytime you open an ac system you need to replace the dryer to
why would you need to replace the receiver dryer? If the system is properly evacuated/recovered than there is no need. Since you bring the temp up when you recover you boil out all the moister in the system.

Also I don't know if it has an accumulator or receiver dryer as I can't remember if it has TXV valve or Orifice tube.

if I remember correctly its a TXV and would have a dryer.
Reply
Old Jul 13, 2007 | 08:29 AM
  #5  
deesnutz's Avatar
deesnutz
Junior Member
 
Joined: May 2007
Posts: 1
Likes: 0
Default

yup this is true unless its been left open for a couple days then its worth replacing.
Reply
Old Jul 13, 2007 | 12:59 PM
  #6  
sameerapte's Avatar
sameerapte
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 2
Likes: 0
Default

Thanks a lot,

I evacuated the system and replaced the O-ring and AC is working fine.
Thanks a lot for the help,

Regards,
Sameer
Reply
Old Jul 13, 2007 | 08:23 PM
  #7  
audiokong's Avatar
audiokong
Member
 
Joined: Jul 2007
Posts: 35
Likes: 0
From: ohio
Default

Originally Posted by Civic2Scooby
why would you need to replace the receiver dryer? If the system is properly evacuated/recovered than there is no need. Since you bring the temp up when you recover you boil out all the moister in the system.

Also I don't know if it has an accumulator or receiver dryer as I can't remember if it has TXV valve or Orifice tube.

if I remember correctly its a TXV and would have a dryer.

opening a ac system makes the dryer susceptable to mositure, ruining the dryer, look it up any automotive text book will tell you to replace the dryer anytime you open the system, just a step to insure that you will not ruin the compressor of any other parts of the ac system, if you are just evacuating and recovering (not removing a line or a part from the system) no there is no need to.....

Last edited by audiokong; Jul 13, 2007 at 09:42 PM.
Reply
Old Jul 13, 2007 | 11:31 PM
  #8  
Civic2Scooby's Avatar
Civic2Scooby
 
Joined: Jul 2003
Posts: 28,282
Likes: 0
From: michigan
Default

Originally Posted by audiokong
opening a ac system makes the dryer susceptable to mositure, ruining the dryer, look it up any automotive text book will tell you to replace the dryer anytime you open the system, just a step to insure that you will not ruin the compressor of any other parts of the ac system, if you are just evacuating and recovering (not removing a line or a part from the system) no there is no need to.....
text book doesn't always equate to real life situations though. I have been working on A/C systems for quite some time and as long as I apply a vaccum to the system thus lowering the boiling point of the R134 than it will boil out the moisture from the system. I will agree it makes the dryer susceptable, but for the part he was replacing I wouldn't worry about it 9 times out 10.
Reply
Old Jul 14, 2007 | 12:14 AM
  #9  
mini-me civic's Avatar
mini-me civic
Senior Member
 
Joined: Apr 2005
Posts: 469
Likes: 0
Default

civic2scooby knows his shit.. ase certified i bet..
Reply
Old Jul 14, 2007 | 08:18 PM
  #10  
audiokong's Avatar
audiokong
Member
 
Joined: Jul 2007
Posts: 35
Likes: 0
From: ohio
Default

Originally Posted by Civic2Scooby
text book doesn't always equate to real life situations though. I have been working on A/C systems for quite some time and as long as I apply a vaccum to the system thus lowering the boiling point of the R134 than it will boil out the moisture from the system. I will agree it makes the dryer susceptable, but for the part he was replacing I wouldn't worry about it 9 times out 10.
agreed, but if the decicate bag fills up with outside mositure, you have no way to catch any more of it that may get into your system, we have to replace it anytime we crack the system at my shop, i would rather be safe than sorry, a $20 dryer is alot better than a $600+ ac compressor, but i do understand your point
Reply



All times are GMT -8. The time now is 10:16 AM.