I have torn one of my rear brake pin boots. I went to my Honda dealer and they cannot locate a part number for the pin boot. They can get any part of the entire rear brake assembly except the boot. I really find this hard to believe. They told me my only option was to get a new brake caliper assembly. I found that absurd. This is for a 1994 Civic Si. Anyone know the part number? I know Acura shared some components on the Integra. Attached is a link to the parts diagram. It is number 21 on the list. Pin Boot

 

jus had to replace the ones on my teg not sure of part number but go to autozone n ask them for the caliper pin dust covers,should come in a brake hardware kit!! do the pins still slide in n out?? mine were rusted fast had to buy new caliper mounting brakets,pins n the dust covers good luck hope this helps a little,oh yeah make sure you put some synthetic(?) brake lube in side of the dust cover if you ever find them them!!

 

Yeah if you can locate a caliper rebuild ket they will be included. I usually get them from rockauto.com but I'm sure they pretty easy to find. i would take the pins out and sand them down if they aren't clean (>400 grit)

 

Went to Autozones website and low and behold Brake Caliper Bushing Thank you for your help.