Si brake problems
Thread Starter
Banded
Joined: Feb 2006
Posts: 1,899
Likes: 0
From: Cali-For-Ni-A
Si brake problems
At higher speeds when I step on the brakes on my 00 si the pedal vibrates sort of like it has abs and the steering wheel shakes... Last time I looked at the pads they were worn unevenly, but still had lots of life left. I'm guessing the rotors are warped. What should I do have rotors machined or just get new rotors? Thanx
Wanderer
Joined: Aug 2000
Posts: 10,793
Likes: 0
From: Not so Sunny Cali
At higher speeds when I step on the brakes on my 00 si the pedal vibrates sort of like it has abs and the steering wheel shakes... Last time I looked at the pads they were worn unevenly, but still had lots of life left. I'm guessing the rotors are warped. What should I do have rotors machined or just get new rotors? Thanx
Joined: Jul 2003
Posts: 28,282
Likes: 0
From: michigan
time for new rotors....or have them turned, but as I have found thus far it is cheaper/easier just to buy new ones as opposed to turning them. I would also throw on a new set of pads while you are in there.
Thread Starter
Banded
Joined: Feb 2006
Posts: 1,899
Likes: 0
From: Cali-For-Ni-A
Ok, thanks a lot guys. I'm gonna get new rotors and definitely replacing all the pads... right now I'm running some bs metallic pads :ugh:... I'm looking at the brembo drilled and slotted rotors, had them on the eg and loved them, great stopping power, and some nice ceramic pads 