Skunk2 Sport Shocks
Thread Starter
Junior Member
Joined: Apr 2003
Posts: 26
Likes: 0
From: austin
Skunk2 Sport Shocks
I ordered a set of skunk2 sport shocks and springs fri 04/27/07 and should be getting them on 05/03/07. Does anyone have a set of these, how do they ride, did you just do an alignment or did you get camber kit, and lastly did you or do you have aftermarket LCAs (lower control arms)? 
my bum is on the swedish!
Joined: Mar 2002
Posts: 10,133
Likes: 0
From: San Antonio, Texas
I have a set sitting in my back seat...
waiting for either a new rear disc setup or better DA trailing arms, plus needed to install an ex tranny and new axles before I put everything in.
camber kits are good on any drop beyond 1.5-1.8" drop. I'm lowered 2.5" with my springs, so I opted for adjustable UCA's in the front, and did the 'ol washer trick for the rear camber.
regardless of how low you are, you'll need an alignment after you install the shocks.
LCA's are optional. some people get them because they're a bit lighter, but its mostly bling factor. I'm just rocking the oem arms.
waiting for either a new rear disc setup or better DA trailing arms, plus needed to install an ex tranny and new axles before I put everything in.
camber kits are good on any drop beyond 1.5-1.8" drop. I'm lowered 2.5" with my springs, so I opted for adjustable UCA's in the front, and did the 'ol washer trick for the rear camber.
regardless of how low you are, you'll need an alignment after you install the shocks.
LCA's are optional. some people get them because they're a bit lighter, but its mostly bling factor. I'm just rocking the oem arms.
