I just got some KYB agx struts for my HB, and there are no stops on the strut piston rod. When I put the car down there was nothing stoping the strut rod to come up thru the pillow mount, thank god the hood was open. Are these the right struts? Should they have stops or washers on the rod? HELP. Thanks.

 

you are supposed to transfer all the bushings washers and stuff from the old strut

 

the stock strut has a welded ring that holds the washer and bushing assembly. this is a tapered rod with no ring.

 

they install exactly like the stock struts, and make sure u use all the stock hardware

 

the stock strut ring shouldnt be welded. i used a mallet to tap mine out

 

i change out a coil over set up so i do have the stock stuff, what should i do.

 

ya use the stock stuff, all of it should come off so it looks like the new one out of the box