Notices

some one help please

Thread Tools
 
Old Mar 1, 2007 | 07:14 AM
  #1  
anticgov's Avatar
anticgov
Thread Starter
Junior Member
 
Joined: Mar 2007
Posts: 11
Likes: 0
Default some one help please

I have a problem with my car not accelerating right. The Rpm's bounce variating on how much I push on the throttle. Can anyone give me a good explanation it would be awsome. Thanks
Reply
Old Mar 1, 2007 | 08:41 AM
  #2  
anticgov's Avatar
anticgov
Thread Starter
Junior Member
 
Joined: Mar 2007
Posts: 11
Likes: 0
Default

its a 91 Civic Hatch It has a 92 1.6 and I have a 7.5 LB Flywheel and stage 3 puke clutch with poly mounts and a vtec head I have already converted my car from DPFI to MPFI and from OBDO to OBD1 that should give you everything you need to diognose the problem oh yeah and MSD power pack and coil um I also have my battery in the back of the car any other ?'s if so I will answer if you could only tell me why my Sh!t is acting up Its a 5 speed and I do have the 4 wire 02 sensor.
Reply
Old Mar 1, 2007 | 08:44 AM
  #3  
anticgov's Avatar
anticgov
Thread Starter
Junior Member
 
Joined: Mar 2007
Posts: 11
Likes: 0
Default

I have also posted this problem about 5 times and explained everthing down to the detail so sorry if I didnt write it again it was rather long and I didnt think anyone would take the time to read all of it so if you are serious I will give you the details on it bit I basicly replaced everthing on the intake besides the sensor on the back right side of the intake that doesnt plug into anything.
Reply
Old Mar 1, 2007 | 08:59 AM
  #4  
Chefboiali's Avatar
Chefboiali
scrotal surge
 
Joined: Oct 2005
Posts: 15,460
Likes: 0
From: Cali
Default

Have you checked for vacuum leaks? Let the car idle, and spray carb cleaner where vacuum lines are. If the idle increases, there's your leak. Works on Small Block Chevy's. Should work on Hondas too? Just a suggestion.

And pipe down, yo. People will get here. Getting mad at not getting free advice when you need it is a recipe for people never wanting to help you.
Reply
Old Mar 1, 2007 | 09:06 AM
  #5  
anticgov's Avatar
anticgov
Thread Starter
Junior Member
 
Joined: Mar 2007
Posts: 11
Likes: 0
Default

Thanks for the input but I have done that and changed my Vacuum box Dude you have to understand how pissed this makes me I have put hella money into this car and I have a job starting on the 10th of march in Vegas 600 miles away from where I am and that car has to get me there. lots of stress bro
Reply
Old Mar 1, 2007 | 11:14 AM
  #6  
Snoopy's Avatar
Snoopy
been there done that
 
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
Default

i say it's that msd crap causing misfires. but what the hell do i know? :eek5r:
Reply
Old Mar 1, 2007 | 01:26 PM
  #7  
Civic2Scooby's Avatar
Civic2Scooby
 
Joined: Jul 2003
Posts: 28,282
Likes: 0
From: michigan
Default

I would have been more than happy to help you but A: this isnt the pre-92 forum so you are posting in an entirely wrong forum for the help you are so eagerly DEMANDING. B: I won't help you because you are a whiney, arrogant, ignorant prick. You can ask anybody on here that I am usually more than happy to help somebody diagnose down to a T. You my friend will not get any of my help...so piss off.
Reply




All times are GMT -8. The time now is 07:06 AM.