DX/HX - swaybarless folks - from 96-00 (96 HX here) - If you added a swaybar, either SI or aftermarket, did you have to make any modifications to your car, or did it just bolt right up?

thanks

 

sorry forgot to specifiy, rear swaybar...

 

I'm 99% sure the rear lca's on dx/lx/hx don't have the holes for the rear sway bar.

simple swap of some new lca's (si/ex/integra/aftermarket) will have the proper holes.

then you just need the swaybar and bushings/endlinks

but I'm probably wrong, so I'll let someone else chime in h:
(I don't feel like researching this at work )

 

Suspension Techniques makes sway bar sets for cars with or without factory sway bars. The most you would have to do is drill a couple of holes.

something like this, it's made to work with existing hardware. http://store.summitracing.com/partde...666+4294923769