Will these doors fit?
Senior Member
Joined: Nov 2006
Posts: 139
Likes: 0
please take my word for it. i have a 93 si and i dont have power windows, my friend's 92 si doesnt have em. several ppl that i know that has 92-95 si's, has no power windows. power sunroof on all si models is standard. power windows, no. in rare cases it could of been installed as an option from the dealer.
i gutted some 95 civic ex coupe doors' internals and converted my si's non power windows to power windows using all oem switches, regulators, and harnesses. its real easy to do, as long you get all the necessary components.
i gutted some 95 civic ex coupe doors' internals and converted my si's non power windows to power windows using all oem switches, regulators, and harnesses. its real easy to do, as long you get all the necessary components.
thanks.
X-Motoring
Joined: Nov 2000
Posts: 2,530
Likes: 0
From: bay area
yes its a complete bolt on affair. you will need the power regulators which will be connect to the sissor handles that hold the glass. oem switches for both sides, the harness that runs from both power regulators and switches. you will also need the under the dash harness that plugs into the fuse box, power window relay, and ex door panels or inner ex panel inserts because the hole that houses the power window switches is different then that of a non power window panel. 
my bum is on the swedish!
Joined: Mar 2002
Posts: 10,133
Likes: 0
From: San Antonio, Texas
exactly. pulling the wires is probably the hardest part.
Thread Starter
2.FAST.4.U.
Joined: Nov 2006
Posts: 57
Likes: 0
From: St.Joseph MO.
Quote:
Originally Posted by Dirtball
So power windows bolt right into non-power windowed door with no modifacation?
pretty much, just takes a little sweat.
Quote:
Originally Posted by Dirtball
Dont i have all that stuff on the EX door?So all i would have to do is take all that stuff like the wires and motor and what not and swap it?
exactly. pulling the wires is probably the hardest part.
Originally Posted by Dirtball
So power windows bolt right into non-power windowed door with no modifacation?
pretty much, just takes a little sweat.
Quote:
Originally Posted by Dirtball
Dont i have all that stuff on the EX door?So all i would have to do is take all that stuff like the wires and motor and what not and swap it?
exactly. pulling the wires is probably the hardest part.
Thanks for your help and input 19.3secFerio