Just wondering if these parts will swap over from a 3rd generation Integra to my 96 Civic HX, with very little or no modification, as in no creating new brackets/welds/etc. If there is any modification, could you elaborate?

1. Rear swaybar and links (b/c the HX has none right now and you can feel it)

As a side note here, what swaybar and links in general could I add to the HX with little or no modification (sp. Si? ex?)

2. Shocks/struts and springs

Thanks!

 

Any shocks and struts will work, but for the swaybar you will have to drill a holes for the endlinks and swaybar brakcets to fit. Or get EX or Si rear lower control arms.

 

Thanks...So I take it to get ANY swaybar to work, even a honda one, I'd have to get the ex or SI lower control arms? However, my lower control arms do have holes for the swaybar bracket, don't know where exactly to look for the endlink holes, if there are any.

Sorry for the simple suspension question, always had trucks, this is my first car and the suspension is different on this thing for sure...same parts, but they are all set up differently underneath. I need to get my hands on a FSM and it'll all become clear.

 

Its easy to find the endlink holes. If you see the rear shock bolt it should be right next to it. If your interested I have a neuspeed one from my 00' Ex. It is complete with all bolts and brackets. Except that one bracket broke recently because of the bump I went over. But you can fab that up or get one cheaply from Neuspeed.