What parts do i need for a rear disk con. for a 97 civic ex? i can buy a rear gsr setup for around 300. is that to much? Here is a list of parts included...

control arms, knuckles, park brake lines, calipers with brake lines and discs

any info would be great.

 

Im not sure if i would pay $300, but i know you'll need a prop. valve off a civic si. The swap is pretty straight forward, i recomend changeing all the brake pads before you bleed the brakes and, make sure you adjust the parking brake cables while the car is in the air, it makes the job a lot easier

 

fyi, all 94+ integra brakes are the same, except for itr's. with that said, you can find them cheaper at a junkyard.

 

Thanks!

 

I used the rear brakes from a 90-93 integra :rick:

$300 is too much

 

u can use the ones off a 90 integ. you just have to use your stock rear lca's