Thanks Tony. Your support was much appreciated. Here are the pics you scolded me about . I did this in my apt. underground garage. Where there's a will, there's a way.

Chillin in the back.


d15b vtec Pretty clean for $375 after tax MAKOTO AUTOPARTS CORPORATION in Gardena, CA. They're also in Virgina. Ask for Dave. Very nice person. Local pick-up saved shipping. 6 month unlimited mile warranty could not be beat. They're on ebay.


$40 hoist off of Craig's List. Bum-leg, but worked lol. Yes, I scraped the ground :lmao:


L.A. Machine Shop on Venice Blvd. resurfaced the flywheel for $28


Thanks to Josh's DIY, I got the clutch and pressure plate on properly


Getting the tranny to meet the block wasn't hard, but took me a while. :hs:


The lower mounts needed to come off. God Bless the impact wrench




h: All by myself. ftl And yes, I put the heat shield back on


The only thing that fit differently from the d16z6 to the d15b vtec was that the power steering bracket didn't line up all the way. The red arrow points to what didn't line up. The blue went in just fine. I guess the d15b block is longer.


Sitting next to her American Older Sister. Thanks HAN!!!!


I didn't use a compressor, but my Dewalt electric impact wrench sure came in handy. Right now I have a P28 w/ RP17 & RP18 removed w/out the jumper on RP18 because I got an automatic P28 and I have a 5-speed. I did need help with the axles and bleeding the clutch. :hs: My friend Kevin Doung helped me. Thanks Kevin!!!!!!!!!!!!!!! Smog on Monday.

 

Awesome, have fun with that thing man.

 

Bitchin'. Good work, man. Glad my DIY worked. It's great to hear that people use that and get their car going again. Very rewarding feeling.

Again, nice work.

 

Thanks again, Goat


Thanks Josh. I swear I read that DIY 30 times before doing it. I even put the pics on my Treo 650 so I could refer to them while working. Rewarding is right. I almost started passing out cigars :chuckles:

 

Nice work.

 

guys i've seen this thing in person and let me say one thing about the swap, CLEAN!

 

D to D swap madness!

It sure is fun the 1st time, isn't it?

 

Thanks

Yeah it really was fun . I learned a lot. Thanks for the support, yo.

 

Makoto is the shit, and they're cheap too....i got my F22B for $700 shipped...I will definitely do business when i do the H22 swap

 

looks good chef my ninja:goodjob:

if you were here in diego i would helped out

seems like you were working on this forever.