i had to replace my distrubutor cap with a new one and a new rotor problem is my rotor is not comming off and i heard it just easily pop off anybody have any ideas also i did unscrew the screw thats on the distributor rotor

 

if u have the screw out of the rotor, it should just slide off!

 

it dosent come off tho its like stuck on there and i dont wanna snap it off or use a screw driver to pry it off

 

may as well use a screw driver at the base & see if u can get it to break free. don't pry on the part that sticks out, you'll probly crack that. Worst case senerio is you'll destry it & have to get a new one anyways.

just don't jack up the dizzy to bad!