Hey, I'm new here to the forums but been a fan of the site for a while.

This may be a stupid Q but I can't figure out how to get to my 92 civic EX's gauge cluster lights.
I've removed the two screws at the top of the black trim piece but I don't know if I can just yank it out after that or what(that piece needs replacing anyway as it is damaged from previous owner).
I was thinking about putting blue lights in their place, if possible.

Any advice would be great. :wavey:

 

There's a screw in behind the clock you have to remove and MAYBE one on the left side vent. The cluster is held on with I think 2 or 4 screws which are obvious after the trim is removed.
It's been a couple months since I had mine out, so forgive my memory.

 

https://www.honda-acura.net/forums/s...d.php?t=174005



EDIT: oops, I posted the same link twice. Sorry about that.
Here's what I meant as the secondary link:
https://www.honda-acura.net/forums/s...d.php?t=136170

 

Thanks for the help guys, I appreciate it.
That write up is awesome westcoaststyle, it would've taken me a week without it.

rotflmao @ Highmile putting a hotweels inside the cluster, that's style!