out driving my suspesion
Right now I have a set of victor racers. Just with the tires my lap-time dropped about 8sec. There were a few corners where I felt the car bounce then a solid hit. I'm sure I was on 3 wheels at that point. I'm trying to upload a vid on you tube so you guys can see what I'm talking about.
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Damn it everytime you are about to take a corner the camera guys pans out so you can't see squat.
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
It would make the car understeer even more. Unless you like that?
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
That’s just it I don't get understeer unless I floor it leaving a corner. If I take it easy there is no understeer. I do get a little oversteer but that is from lifting the throttle interring the corner. I'd have to say I have the car balanced at half throttle. I did find out last night that the camber adjustable upper ball joints are hitting the top of the strut tower. There is a large nut on the top of them sucking up about a inch of travel. They only give 1.5 neg. camber anyway. I need a bit more. Now that I have found that problem I’ll work it before I start changing anything else.


