acura honda conversion
#1
acura honda conversion
i want to put the b18b1 out of my 2000 acura integra in my 98 civic hatchback with the d16. I have new T3 turbo, intercooler, blowoff valve, header, and i also want to get a manual tranny for the b18b1, and put it in the hatchback. Can i take the wiring harness and axles out of the acura and put them in the hatchback?. Or should I get new ones or custom ones made. And what about the motor mounts? Can i get them from the factory or do i have to have them made... Should i get anything else to go along with it?...
#2
SuMaDiNaC
Join Date: Dec 2005
Location: Ontario,Canada
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
everything bolts right up and u need to use acura axels on ur civic as far as the engine mounts you need a rear engine mount (but its commin out of ur integra so everything should be fine ) no extra parts needed and u can also use the b18b harness
#6
Pull my finger
Join Date: Apr 2004
Location: Arizona
Posts: 41,423
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by virgil
i want to put the b18b1 out of my 2000 acura integra in my 98 civic hatchback with the d16. I have new T3 turbo, intercooler, blowoff valve, header, and i also want to get a manual tranny for the b18b1, and put it in the hatchback. Can i take the wiring harness and axles out of the acura and put them in the hatchback?. Or should I get new ones or custom ones made. And what about the motor mounts? Can i get them from the factory or do i have to have them made... Should i get anything else to go along with it?...
i have a feeling you're full of shit... and I'll give you 3 chances to prove me wrong...which you wont
EDIT: here I'll highlight your list for you Now what's wrong with that list?
Last edited by RicoD; 07-13-2006 at 03:40 PM.