Notices

Anyone dealt with these guys?

Thread Tools
 
Old May 16, 2006 | 09:21 PM
  #1  
Seruy's Avatar
Seruy
Thread Starter
Senior Member
 
Joined: Feb 2006
Posts: 150
Likes: 0
From: Chicago
Default Anyone dealt with these guys?

Hello everybody, looking to buy a complete front clip from Japan, need an engine. I'd like to know if anyone has dealt with these guys or have heard some good feedback about them (are they legit?).

1) http://www.jrautoparts.com/
2) http://www.flashoptions.com/

Any input is appreciated, thanks.

P.S. or if anybody is parting the whole front end of their Teg or Si let me know (B series only please), or if you know someone who is.
Reply
Old May 17, 2006 | 09:36 AM
  #2  
egghead's Avatar
egghead
TF Plasti-crack Crew
 
Joined: May 2002
Posts: 1,086
Likes: 0
From: nj
Default

I read a lot of bad stuff about Flash Options. They are in Malaysia, and if they actually ship your stuff, then you have to deal with customs.

I don't know anything about jrautoparts, but at least they seem to be domestic.
Reply
Old May 17, 2006 | 12:48 PM
  #3  
F22B Prelude's Avatar
F22B Prelude
Rachel Bilson
 
Joined: Oct 2005
Posts: 11,230
Likes: 0
From: South Bend/Walkerton, Ind
Default

F a front clip....its gonna be expensive as hell and freight is gonna be outrageous.
Reply
Old May 17, 2006 | 01:37 PM
  #4  
b20hatchy's Avatar
b20hatchy
EM1 Crew member #74
 
Joined: Mar 2005
Posts: 890
Likes: 0
Default

Just dont go to jazzproparts.com to order a motor. I bought a b16a swap and 30miles later it blew the headgasket. They did nothing.
Reply
Old May 17, 2006 | 07:06 PM
  #5  
Seruy's Avatar
Seruy
Thread Starter
Senior Member
 
Joined: Feb 2006
Posts: 150
Likes: 0
From: Chicago
Default

WEll, thanks for the replies I guess. I can post up a pic of my engine bay so that you'll understand why I need the whole front clip.

http://img66.imageshack.us/img66/9932/engine12ls.jpg

I will definitely need more stuff in there so...
Reply
Old May 17, 2006 | 08:31 PM
  #6  
vlc92189's Avatar
vlc92189
Member
 
Joined: Feb 2006
Posts: 35
Likes: 0
Default

hey try like www.hmotorsonline.com or just keep searching... honda tech has a good sponsor that sells motors cheap
Reply
Old May 18, 2006 | 06:43 AM
  #7  
egghead's Avatar
egghead
TF Plasti-crack Crew
 
Joined: May 2002
Posts: 1,086
Likes: 0
From: nj
Default

What else do you need besides what comes with a full swap? Some brackets and a radiator? That's not really that much extra. Don't get fooled by ridiculously low prices.

Stick with proven sellers like hmotors. I had no problems at all with them, and I heard people have been very satisfied with the resolutions of any problems they did have. It's not a coincidence that everyone recommends them.
Reply
Old Jun 9, 2006 | 08:43 PM
  #8  
typercivic's Avatar
typercivic
Junior Member
 
Joined: Jun 2006
Posts: 13
Likes: 0
From: G.W. Bush likes men
Default

I bought the front clip for my swap from J&R Auto. Vincent is very helpful and knows his shit. He will tell you like it is and is very knowledgable. I'm pretty close to where they are located so shipping wasn't an issue but if you're looking for an opinion, they were the cheapest and cleanest place I could find. I bought a 98 JDM ITR front clip and everything for the swap for $4200. Motor had less than 25,000 miles on it and was factory clean. They are also very reasonable on accessories as well. They only deal in JDM. Hope it was helpful.
Reply
Old Jun 9, 2006 | 11:07 PM
  #9  
Fkatz's Avatar
Fkatz
Senior Member
 
Joined: Feb 2006
Posts: 131
Likes: 0
From: Chicago/Indiana
Default

i know ur up in chicago look up in the yellow pages eriks guy is straight up japanesse lookin up a 2jzgte supra twin turbo and the motor ecu and harness was lk 300 less then ebay and any other site on the internet

eriks in the yellow pages guy is japanesse so hard to understand but nice guy
if i find a classmates number layin around he has a b16
Reply
Old Jun 9, 2006 | 11:15 PM
  #10  
Fkatz's Avatar
Fkatz
Senior Member
 
Joined: Feb 2006
Posts: 131
Likes: 0
From: Chicago/Indiana
Default

Eric Japan Engine Inc.
3900 N Elston Ave
Chicago, IL 60618

(773) 463-8108
don't order a motor go pick it up from this guy
Reply




All times are GMT -8. The time now is 06:15 AM.