Notices

Check engine light readings

Thread Tools
 
Old May 3, 2006 | 06:30 PM
  #1  
james_stewart's Avatar
james_stewart
Thread Starter
Junior Member
 
Joined: May 2006
Posts: 9
Likes: 0
Default Check engine light readings

1997 Honda Civic HX 1.6
258,000 miles (highway)

I just got back from a failed emissions test. The fault codes I received at the emissions center were P0401 and P1337. Telling me I have "Exhaust Gas Recirculation Flow Insufficient Detected" But, when I connect a paper clip to the OBDII and read the flashes I get 1 short flash, telling me it's the O2A oxygen sensor #1. This makes no sense. why is the emissions center giving me P0401 and an at home test giving me a O2A fault?
Reply
Old May 3, 2006 | 06:32 PM
  #2  
james_stewart's Avatar
james_stewart
Thread Starter
Junior Member
 
Joined: May 2006
Posts: 9
Likes: 0
Default

Can a faulty O2A sensor lead to an EGR error?

BTW. I've read plenty about the EGR and even pulled it off the clean carbon build up. I also priced one out for $140 or my dad has the same year Civic that he just totaled in an accident so I asked him if I could borrow his EGR
Reply
Old May 4, 2006 | 02:03 PM
  #3  
james_stewart's Avatar
james_stewart
Thread Starter
Junior Member
 
Joined: May 2006
Posts: 9
Likes: 0
Default

bump?
Reply




All times are GMT -8. The time now is 09:46 PM.