Has anyone installed or know of someone who's installed a stage 2 Zex Camshaft (105300) on a D16Y8? I just want to know if it will make my car sound like a diesel truck or motorcycle at idle, or if it will make the car sound nice at idle. thanks.

 

My friend has stage2 crower's in his integra it idle like a v8. It's in a way kind of choppy.

 

Crower Stage 2 and Zex Stage 2 are way different

 

It will most likely lope at idle.

Do you have any specs on it or are we supposed to speculate on whether it will lop or not?

 

Here's the Specs:

PART # 105300
GRIND NUMBER 260 VTEC D16Y8 1.6L

ADV. DUR. @ .006 VALVE LIFT: PRI INTAKE 232 SEC INTAKE 236 VTEC INTAKE 256 EXHAUST 268

DURATION @.50: PRI INTAKE 190 SEC INTAKE 194 VTEC INTAKE 220 EXHAUST 216

GROSS VALVE LIFT: PRI INTAKE .300 SECONDARY INTAKE .308 VTEC INTAKE .456 EXHAUST .428

CAM LOBE LIFT: PRI INTAKE .1890 SEC INTAKE .1940 VTEC INTAKE .2770 EXHAUST .2360

 

I'm looking at one of these myself... THanks for the help everyone in adavance!

 

Does it state the overlap period anywhere within the specs? That will usually tell you how lopey it will be.

 

no, it just shows those specs

 

Okay this thread is dead... I've found my answer, my cam was installed today. This cam gave me some good high end power, it should be better once I learn how to tune my VAFC2, I'll be looking into dyno tuning it soon, and see if I can pull some go0d non boosted whp.