Installing Taillights
12-22-2005, 05:50 AM
#1
Member
Thread Starter
Join Date: Aug 2005
Location: Ohio
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Installing Taillights
How would I install taillights on my civic. I posted a tread several months ago but didn't understand how to do it.
https://www.honda-acura.net/forums/s...39#post2506139
Do these have anything to do with it?
https://www.honda-acura.net/forums/s...39#post2506139
Do these have anything to do with it?
12-22-2005, 06:00 AM
#2
Senior Member
Join Date: Apr 2003
Location: Dallas, TX
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
All if the bolts are behind your taillights. Each part (4 parts total) will have 3 to 4 bolts. The "Top Bolt" picture you have above is one of them.
Just look at your new taillights and where they have their bolts. Your OEM lights will have bolts in the same places. It's not rocket science. Just use your brain.
Just look at your new taillights and where they have their bolts. Your OEM lights will have bolts in the same places. It's not rocket science. Just use your brain.
12-22-2005, 11:42 AM
#4
Wanderer
Join Date: Aug 2000
Location: Not so Sunny Cali
Posts: 10,793
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by HondaDriver4evr
What about "Right Inside?"
Look inside your trunk. There should be a black plastic covering with a little notch that you could put your finger in. Pry that out and it should reveal 4 little bolts (looking at the new taillights could help you find where they're at). Might be a little difficult to see with all the wiring in the way.
Pull out the bulbs first (turn them counter clockwise and pull out) then undo the bolts for the taillight. Installation is the reverse of removal.