Notices

electricAL help needed (starting)

Thread Tools
 
Old Dec 6, 2005 | 11:41 AM
  #1  
inkedaura's Avatar
inkedaura
Thread Starter
Junior Member
 
Joined: Nov 2005
Posts: 16
Likes: 0
Default electricAL help needed (starting)

ok, I have a 98 honda civic ex with a gsr swap also I have msd ignition system a6(these have been in my car forever without a problem)...ok within the past couple weeks when I go to start my car nothing happens.. its not the battery and nothing is turning over, all I hear is the doors locking.. then after a couple of times tring it starts without a problem.. what could this be? it doesnt happen everytime I get into my car but it happens enuff thaT Im concerned about it. also when i go to start my car for the first time of the daY it starts ruff, I have to pump on the gas peddal to get it going otherwise it will just clunk out...anyone knows whats going on? thanks
Reply
Old Dec 6, 2005 | 10:09 PM
  #2  
bambbrose's Avatar
bambbrose
Registered User
 
Joined: Jan 2003
Posts: 1,881
Likes: 0
From: Utah
Default

sounds like your starter might be getting close to the end of its life
Reply
Old Dec 7, 2005 | 02:07 AM
  #3  
Highmile's Avatar
Highmile
VX Hatch with 431,500!
 
Joined: Sep 2005
Posts: 560
Likes: 0
From: Missouri
Default

It does sound like a starter starting to fail. If it gets worse, and you can't start, hit it with a hammer and it should start.

Also you may have a weak or leaky fuel pump or a losing presure in the line as a seperate problem? When you first go to start the car, turn the key to run, wait for 2-3 seconds, then crank it (if your starter will let you). What you are doing is letting the fuel pump pressurize the line and it should start easier. But then again, clunking out sounds like a throtle problem?
Reply
Old Dec 7, 2005 | 09:18 AM
  #4  
bambbrose's Avatar
bambbrose
Registered User
 
Joined: Jan 2003
Posts: 1,881
Likes: 0
From: Utah
Default

shit that reminds me, It could also be a main relay, but I think that when they go bad it'll crank over but not fire up
Reply
Old Dec 7, 2005 | 06:10 PM
  #5  
inkedaura's Avatar
inkedaura
Thread Starter
Junior Member
 
Joined: Nov 2005
Posts: 16
Likes: 0
Default

ok now it's cranking up but not turning over!!!!! fuck fuck !!!! I'm stuck at my work , which isnt so bad..I'm a tattoo artist so I got a comp and big screen tv to keep me busy....ok so now I need to know where I can find a tutorial on how to install a new starter... is this even recomened? the sooner the better thanks
Reply




All times are GMT -8. The time now is 11:48 PM.