would a DX clutch fit a Ex tranny
#1
Civic1.6VTEC
Thread Starter
Join Date: Mar 2002
Location: Miami, FL
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
would a DX clutch fit a Ex tranny
wanted to know if his 4-puck clutch will fit on a 1.6 motor.
and also, you need the wiring harness from the ex model to use on the dx motor if you are swapping the motor, right??
and also, you need the wiring harness from the ex model to use on the dx motor if you are swapping the motor, right??
#4
wooooo woooooooooo
Join Date: Mar 2002
Location: Twin Cities
Posts: 3,134
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by madtownhonda
The DX is not prewired for vtec, you will have to add the wires yourself.
The DX is not prewired for vtec, you will have to add the wires yourself.
#5
Originally posted by Bakeoff
the chassis is wired for vtec!!! All you need is the engine harness! I know, I did it...:fawk:
the chassis is wired for vtec!!! All you need is the engine harness! I know, I did it...:fawk:
#6
i believe all hatches are from canada. well for the 5th gens atleast
#7
wooooo woooooooooo
Join Date: Mar 2002
Location: Twin Cities
Posts: 3,134
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SpeedRacerEX-R
It depends on what year the car is and if your car is from Canada or not.
It depends on what year the car is and if your car is from Canada or not.
#9
All 1992 Civics built in Japan were pre-wired for VTEC.
1993 is when Honda started mass producing in Canada for North America. I dont think those were pre-wired.
1993 is when Honda started mass producing in Canada for North America. I dont think those were pre-wired.
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info